CLP

Small and Fast Load Washer. When no other load washer can be installed in your application: PACEline CLP piezoelectric load washers fit virtually anywhere due to their minimal height of typically 4 millimeters. The ideal solution for machine monitoring (e.g. welding machines) and laboratory experiments.

SKU: 32
  1. General Details

    PACEline CLP Piezoelectric Subminiature Load Washer: Capacities From 3 kN to 80 kN

    PACEline CLP piezoelectric load washers have a very low height of 3 to 5 mm. The sensors enable force to be measured at locations where standard force sensors cannot be installed. The sensors have an integrated cable (either 0.5 or 1 m long) and are a cost-effective way to allow for piezoelectric measurements to be taken.

    By combining CLP load washers with different mounting directions of at least two CSW load washers, very small measurement systems can be set up to measure forces in different directions simultaneously.

    • Capacities: 3 kN to 80 kN
    • HBM accuracy class: 1

    Minimal space required

    • 3 mm (CLP/3KN) to 5 mm (CLP/80 KN) height
    • 12 mm and 36 mm outside diameter
    • Also for use under difficult EMC conditions
    • Robust due to stainless steel materials and IP65 degree of protection (i.a. through integrated cable with different lengths)

    Dynamic and wide measurement range

    • Fundamental frequencies in the kHz range due to extremely stiff design
    • All sensors of the CLP family have the same sensitivity
    • Low drift and high quality
    • The output signal depends only on the type of installation and the force applied.

    Well-thought-through accessories

    • Industry tried and tested charge amplifiers – even with higher IP65 degree of protection
    • Summing boxes and amplifiers are galvanically isolated from the test object to which they are installed
    • Wide choice of low-noise cables and extension adapters, available in practical lengths and with plugs suitable for the charge amplifier

    Extensive range of accessories

    • Various cables
    • Summing boxes for connecting sensors in parallel
    • Pre-stressing sets for convenient installation
    • Coupling for cable extension
  2. Documents